SealMaster CRACK PRO 60 User Manual (English)

Anne LeeAug 4, 2025

What to do if the burner does not light on my SealMaster CRACK PRO 60?

D
Daniel GallagherAug 4, 2025
If the burner on your SealMaster Trucks doesn't light, several issues could be the cause. Here's a list of things to check: * If the battery is low, replace it. * If the blower motor is slow, check the blower wiring for power. * If the CAD cell is dirty, clean the glass lens. * If the coupler is damaged, replace it. * If the burner is in lockout, remove the negative cable and reattach it. * If the fuel filter is plugged, clean it as needed. * If there is a blower fan, check for obstructions. * If the green light is on, check all of the above.

Brand	SealMaster
Model	CRACK PRO 60
Category	Trucks
Language	English

Brand

SealMaster

Model

CRACK PRO 60

Safety Precautions and Cautions

Precautions

General safety guidelines for operating the equipment, including PPE and awareness.

Cautions

Specific warnings about moving parts, guards, lid operation, and fueling.

First Aid for Asphalt Burns

Procedure for treating molten asphalt cement burns, including cooling and seeking medical attention.

Operating Instructions - Diesel Fuel Burner

Diesel Burner Startup Checklist

Pre-operation checks including engine oil, hydraulic oil, heat transfer oil, and fuel levels.

Before Starting the Diesel Engine

Ensures the agitator control valve is in the neutral position before engine startup.

Starting the Diesel Engine

Steps to start the engine, including fuel shutoff, choke, throttle, and ignition switch.

Starting Temperature Control

Setting the desired temperature for heat transfer oil or material using the control box.

Adding Material to Diesel Burner

Procedure for adding material blocks to the tank and managing temperature.

Pouring Material with Diesel Burner

Steps for dispensing material using the discharge valve and applicator.

Operating Instructions - LP Gas Burner

LP Gas Burner Startup Checklist

Pre-operation checks for the LP gas burner, similar to diesel but specific to gas.

Before Starting the LP Gas Engine

Ensures the agitator control valve is neutral before starting the engine for the LP gas unit.

Starting the LP Gas Engine

Steps to start the engine for the LP gas system, including fuel shutoff and ignition.

LP Gas Burner Pictures

Diagrams illustrating key components of the LP gas burner system.

Adding Material to LP Gas Burner

Procedure for adding material to the tank when using the LP gas burner.

LP Gas Burner Components Pictures

Visual identification of key components of the LP gas burner system.

Pouring Material with LP Gas Burner

Steps for dispensing material using the discharge valve for the LP gas system.

Machine Maintenance

Maintenance Schedule

Routine maintenance tasks and their recommended frequency for the equipment.

Troubleshooting

Troubleshooting Diesel Fuel Burner

Common problems and their possible causes and solutions for the diesel fuel burner.

Troubleshooting LP Gas Burner

Common problems and their possible causes and solutions for the LP gas burner.

Hydraulic Oil Information

Hydraulic Oil First Aid Measures

First aid procedures for contact with hydraulic oil, including eye, skin, and inhalation.

Fire-Fighting Measures for Hydraulic Oil

Suitable extinguishing media and protective actions for fires involving hydraulic oil.

Exposure Controls and Personal Protection for Hydraulic Oil

Guidelines for safe handling, ventilation, and personal protective equipment when working with hydraulic oil.

Toxicological Information for Hydraulic Oil

Information on acute toxicity, irritation, sensitization, mutagenicity, and carcinogenicity of the hydraulic oil.

Transport Information for Hydraulic Oil

DOT identification, hazard class, and shipping name for the hydraulic oil.

Other Information for Hydraulic Oil

Revision history, supersedes information, and preparation details for the hydraulic oil SDS.

Wiring Diagrams

Temperature Control Box Wiring Diagram

Schematic showing the electrical connections for the temperature control box.

Electric Brakes and Running Lights Wiring

Wiring schematics for the trailer's electric brakes and running lights system.

Machine Pictures and Parts List

Machine Picture 1 - Overview

Labeled diagram of the Crack Pro unit, identifying major components.

Parts List for Picture 1

Detailed list of parts with item numbers, part numbers, quantity, and description.

Machine Picture 2 - Components

Labeled diagram showing specific components like the oil dipstick and propane tank holder.

Parts List for Picture 2

Detailed parts list corresponding to Picture 2, including propane system components.

Machine Picture 3 - Engine and Tank

Labeled diagram showing the engine, hydraulic pump, and material tank.

Parts List for Picture 3

Detailed parts list for Picture 3, covering engine, pumps, and tank components.

Machine Picture 4 - Burner Assembly

Diagram illustrating the components of the diesel fuel burner assembly.

Parts List for Picture 4

Detailed parts list for the diesel fuel burner assembly components.

Machine Picture 5 - LP Gas Burner Assembly

Diagram showing the components of the LP gas burner assembly and controls.

Parts List for Picture 5 (LP Gas Burner)

Detailed parts list for the LP gas burner assembly, including hoses and regulators.

SealMaster CRACK PRO 60 User Manual

Table of Contents

Questions and Answers:

SealMaster CRACK PRO 60 Specifications

Summary

Correspondence

SealMaster Limited Warranty