P/N: E00SMT120VCO Version：A/0
6
Compliance with Safety Measures
For using analyzer safely and efficiently, please observe the following precautions:
Avoiding failure of analyzer1)
The working environment of the analyzer should meet the requirements in this manual.
Preventing electric shock2)
Do not open the analyzer without the authorization of Seamaty, and prevent the liquid
splashing into the analyzer. In order to prevent the occurrence of electric shock and other
safety incidents, if the liquid was into the analyzer inadvertently, please contact our after-
sales service team in time before power on.
Preventing pollution3)
It is a must to wear protective gloves during operation, or else there is a potential risk of
biological infection. There is also a potential biosafety risk in the absence of biosafety-
treated of used reagent disc. Once the skin is in direct contact, immediately wash and
disinfect the contact area and consult a doctor.
Operating reagent disc4)
Reagent beads may contain corrosive substances, please follow the instructions in
accordance with the manual. The operator will not come into contact with the reagent
beads sealed in the reagent disc rotor during normal use unless the rotor breaks. In case
of this, try to avoid direct contact with the reagent disc and prevent the reagent beads
entering into the respiratory tract.
Disposing reagent disc5)
For further guidelines on handling and disposing of hazardous laboratory wastes, please
refer to your local health and safety regulations.
Instructions
To Next Page
Loading...
Need help?
General