6
PACKAGE CONTENT
1x trolling motor, propeller, installation kit with spare parts, and user manual
Propeller
Propeller
Wrench
Stainless
Washers
Drive
Pins
Nuts
Jumper
Wire
Sacrificial
Anodes
User
Manual
Unplug the trolling motor after each use, and when charging the battery.
An operating or charging battery produces gas that can ignite and explode,
spraying out sulfuric acid can cause severe burns. Ventilate the area around the
battery and wear protective equipment when handling or servicing batteries.
Performing service or maintenance without first disconnecting the battery can cause
product damage, personal injury, or death due to fire, explosion, electrical shock, or
unexpected motor starting. Always disconnect the battery cables from the battery
before maintaining, servicing, installing, or removing motor components.
Do not allow children to operate the electric outboard motor.
Do not modify the unit in any way or add accessories not intended for this product.
Do not submerse the motor upper-unit controller box. If the unit is accidentally
submersed, disconnect battery right away. The motor needs a full service within 24
hours if suffered such a water damage.
Always disconnect power of the motor when replacing propeller or transport.
To prevent accidental damage of the fiberglass shaft, do not over tighten the
mounting bracket.
Only use this product between the temperatures of -20C to +45C (-4F to +113F).
To Next Page
Loading...