To Next PageTo Next Page
Need help?Do you have a question about the Sears Craftsman 390.305001 and is the answer not in the manual?
General| Brand | Sears |
|---|---|
| Model | Craftsman 390.305001 |
| Category | Water Pump |
| Language | English |
Explains the safety alert symbol, DANGER, WARNING, CAUTION, and NOTICE definitions for hazard communication.
Details precautions for avoiding fatal electrical shocks during pump servicing, including grounding and GFCI use.
Covers safe pump operation, including motor oil, installation limits, hazardous environments, and cord care.
Warns about electric shock risk in wet basements and outlines necessary safety procedures.
Details sump location, minimum size requirements, and periodic inspection needs for proper installation.
Guidance on setting the pump, securing the discharge line, and using Teflon tape for sealing.
Instructions for installing and testing the automatic float switch for proper pump activation.
Specifies the need for a 3-prong plug, polarized outlet, and recommends a 15 amp branch circuit.
Provides methods for grounding outlets using copper wire and cold water pipes, with diagrams.
Lists minimum generator watt ratings required for powering specific pump models.
Details maintenance tasks like keeping the inlet screen clean and cleaning the impeller.
Addresses common issues like pump not operating, blowing fuses, or not emptying the sump.
Step-by-step guide for replacing the tethered float switch on the sump pump.
Provides technical data including stock number, HP, amps, dimensions, and GPM at various pumping distances.
Diagram and list identifying key parts of the sump pump with corresponding part numbers.
Contact information for ordering parts in the U.S.A. and outside the U.S.A.
