SeasonsComfort SM13R1

Questions and Answers

S
Seth HansenAug 7, 2025
Why is my SeasonsComfort Air Conditioner not cooling well?
- I
  ibrownAug 7, 2025
  If your SeasonsComfort Air Conditioner isn't cooling well, several factors could be the cause. First, ensure that the air filter is clean; if it's blocked with dust or animal hair, turn off the unit and clean the filter according to the instructions. Check that the exhaust hose is properly connected and not blocked. If the unit is low on refrigerant, you'll need to call a service technician to inspect it and add more. Make sure the temperature setting isn't too high by decreasing the set temperature. Verify that all windows and doors in the room are closed to prevent warm air from entering. Also, confirm that the room size is appropriate for the unit's cooling capacity. Finally, remove any heat sources from the room if possible.
T
Tiffany AguilarAug 17, 2025
How to fix a noisy and vibrating SeasonsComfort SM13R1 Air Conditioner?
- Y
  yjamesAug 17, 2025
  If your SeasonsComfort Air Conditioner is excessively noisy and vibrates too much, it might be because the ground isn't level. Place the unit on a flat, level surface. Also, the air filter might be blocked with dust or animal hair. If so, turn off the unit and clean the filter according to the instructions.
J
Jorge GonzalesAug 27, 2025
Why does my SeasonsComfort SM13R1 make a gurgling sound?
- G
  gwebbAug 27, 2025
  This gurgling sound in your SeasonsComfort Air Conditioner is normal. It is caused by the flow of refrigerant inside the unit.

Summary

Safety Precautions

Note about Fluorinated Gasses

Information on fluorinated greenhouse gases and technician requirements.

Sociable Remark

Disposal instructions for electronic waste in European countries.

WARNING for Using R32;R290 Refrigerant

Safety warnings for R32/R290 refrigerant, including storage and ignition sources.

Caution: Risk of fire;flammable materials

Warning about fire risk from flammable materials and refrigerants.

Explanation of symbols displayed on the unit

Explains symbols used for R32/R290 refrigerant units.

Installation Instructions

Preparation

Details on preparing the unit and understanding illustrations for installation.

Design Notice

Information on design specifications subject to change without prior notice.

Ambient Temperature Range For Unit Operating

Specifies the operating temperature ranges for different modes (Cool, Dry, Heat).

Exhaust Hose Installation

Instructions on installing or removing the exhaust hose based on the usage mode.

Choosing The Right Location

Requirements for selecting an appropriate installation location to minimize noise and ensure proper function.

Energy Rating Information

Details on energy rating and noise information based on standard installation.

Tools Needed

Lists the necessary tools for installation, such as screwdrivers and tape measures.

Accessories

Lists various accessories available for the unit, with quantities and model variations.

Window Installation Kit

Details the components and steps for installing the unit in a window.

Hung Window or Sliding Window Installation

Instructions for installing the unit in hung or sliding windows.

Wall Installation

Steps and components for installing the unit through a wall.

Operating Instructions

Control Panel Features

Explains the indicators and buttons on the unit's control panel.

Operation Instructions

Details how to perform COOL and HEAT operations using the control panel.

DRY operation

Instructions for operating the unit in DRY mode for dehumidification.

AUTO operation

How the unit automatically selects cooling, heating, or fan mode.

FAN operation

Instructions for operating the unit in FAN mode.

TIMER operation

How to set Auto-on and Auto-off timer programs for the unit.

Other features

Covers features like Follow Me/Temp Sensing and Auto-Restart.

AIR FLOW DIRECTION ADJUSTMENT

How to adjust the air flow direction automatically using the SWING button.

WAIT 3 MINUTES BEFORE RESUMING OPERATION

Explains the delay before restarting the unit after it has stopped.

POWER MANAGEMENT feature

How the unit manages power based on ambient temperature.

Water drainage

Instructions for draining water during dehumidifying modes and handling full water collection trays.

Maintenance

Safety Precautions

Essential safety measures to follow before cleaning or servicing the unit.

Air Filter Cleaning

Guide on how to clean the air filter for optimal performance.

Unit Cleaning

Instructions for cleaning the unit's cabinet and components.

Store the unit when not in use

Steps for preparing and storing the unit during off-season or periods of non-use.

Troubleshooting Tips

Troubleshooting Guide

Provides solutions for common unit problems, causes, and troubleshooting steps.

Impedance Information

Information regarding system impedance requirements for compliance with EN 61000-3-11.

LIMITED WARRANTY

NORMAL RESPONSIBILITIES OF THE CONSUMER

Lists the responsibilities of the consumer regarding appliance use, installation, and maintenance.

EXCLUSIONS

Details what is not covered by the warranty, such as improper installation or misuse.