Seat ateca - Page 113

Fuses and bulbs
Turn the connector lock ›
›
›
Fig. 116 in the
direction of arrow
1
and pull on the
c
onnect
or
.
Rotate the bulb holder in the direction of
arrow
2
and extract it with the bulb.
R
ep
l
ace the defective bulb with a new
bulb with the same features.
Insert the bulb holder in the number
plate light and turn in the opposite di-
rection of arrow
2
until it stops.
Plug the c
onnect
or int
o the bulb holder.
Note
Depending on how equipped the vehicle is,
the number plat
e lights may be LEDs. LEDs
have an estimated life that exceeds than that
of the car. If a light with LEDs fails, go to an
authorised workshop for replacement.
3.
4.
5.
6.
7.
Side turn signals
Fig. 117 Turn signal integrated in the rear
v
iew mirr
or
The side turn signals are LEDS and are inte-
gr
at
ed in the e
xterior mirrors.
In case of failure, go to an authorised work-
shop to have them replaced.
111
Technical dataAdviceOperationEmergenciesSafety