Seat Leon 5D - Page 75

Instruments and warning/control lamps
Open the Service menu
Vehicles with analogue instrument panel:
●
To open up the
Service
menu, select the
Range
information profile while in the
Driv-
ing data
menu, and keep the

key pressed
on the multifunction steering wheel for ap-
proximately 5 seconds. When it is released,
the
Service
menu will be displayed. Now
you can browse through the menu using the
keys on the multifunction steering wheel as
usual.
Vehicles with digital instrument panel (SEAT
Digital Cockpit):
●
While in
Classic View
, go to the Initial Da-
ta screen, press the

button on the multi-
function steering wheel for about 5 seconds
and release it.
●
Next, the
Configuration list
menu is
displayed, where you can choose between
the
Service menu
or the
View selection
from where the instrument cluster views can
be switched on and off.
Restart the service interval display
Select the
Service
menu and follow the in-
structions on the screen of the instrument
panel.
Restart the oil service
Select the
Restore Oil service
menu and
follow the instructions on the instrument pan-
el display.
Restart journey data
Select the
Reset trip
menu and follow the
instructions on the instrument panel display
to reset the value.
Identifying letters on engine (LDM)
Select the menu
Engine code
. The identify-
ing letters of the engine will be shown on the
instrument cluster display at the bottom left.
Setting the clock
Select the
Time
menu and set the correct
time by turning the right thumbwheel of the
multifunction steering wheel.
Tyre pressure
To save the tyre pressure after inflating or
changing tyres
›››
page 346. Follow the in-
structions on the instrument cluster.
Driving data indicator (multifunc-
tion display)
3 Applies to vehicles with analogue instrument
panel
The display of the travel data (multifunction
display) shows different values about the
journey and the consumption.
Change from one display to another
Vehicles without multifunction steering wheel:
●
Press the rocker switch

on the wiper lev-
er
›››
page 85.
Vehicles with multifunction steering wheel:
●
Turn the right thumbwheel of the multifunc-
tion steering wheel
›››
page 85.
Changing memory
Vehicles with analogue instrument panel:
●
Press the

button on the windscreen
wiper lever or the

button of the multifunc-
tion steering wheel.
Vehicles with digital instrument panel:
●
Depending on the view, select
Trip data
and press the left arrow or the

button on
the multifunction steering wheel.
Since start:
The memory is deleted if
the journey is interrupted for more than 2
hours.
»
–
73