Seat Leon 5D - Revolution Counter

Operation
Note
●
The appearance of the symbols may vary
slightly depending on the equipment and
model. System updates may modify or ex-
pand the symbols.
●
When the system is switched on, eco-ef-
ficient driving assistance can also increase
recuperation without any indication being
displayed. This can occur in situations such
as when the accelerator pedal is released
when a vehicle is driving in front. In this
case, energy recuperation is adapted
match the speed of the vehicle in front
without any indication being displayed.
Time
Setting the time on the infotainment sys-
tem
●
Press

/

> Settings.
●
Select the menu option Time and date to
set the time
›››
page 89.
Setting the time on an analogue instru-
ment panel
●
In the classic view
›››
page 69 hold the but-
ton

of the multifunction steering wheel
pressed when you have selected the date,
route and autonomy information.
●
Press and turn the button

to make the
adjustments.
Setting the time on analogue the instru-
ment panel
●
When in the
Driving data
menu, select
the
Range
function (

> Interior > Instru-
ment cluster).
●
Press the button

on the multifunction
steering wheel until the Service menu is dis-
played on the instrument panel display
›››
page 72.
●
Select the menu
Time
.
●
Adjust the correct time by turning the right
thumbwheel of the multifunction steering
wheel.
Revolution counter
The rev counter indicates the number of en-
gine revolutions per minute.
Together with the gear-change indicator, the
rev counter offers you the possibility of using
the engine of your vehicle at a suitable
speed.
The beginning of the red zone of the rev
counter indicates the maximum speed in any
gear after running-in and with the engine hot.
However, it is advisable to change up a gear
or move the selector lever to D (or lift your
foot off the accelerator) before the needle
reaches the red zone
›››
.
We recommend that you avoid high revs and
that you follow the recommendations on the
gear-change indicator. Consult the addition-
al information in
›››
page 230, Selecting the
optimal gear.
CAUTION
●
To prevent damage to the engine, the rev
counter needle should only remain in the
red zone for a short period of time.
●
When the engine is cold, avoid high revs
and heavy acceleration and do not make
the engine work hard.
For the sake of the environment
Changing up a gear early will help you to
save fuel and minimise emissions and en-
gine noise.
80