Connectivity
MirrorLink
®
Fig. 20 Function buttons in the general view
of compatible applications.
Fig. 21 Other MirrorLink function buttons.
MirrorLink
®
is a protocol which enables com-
munication between a portable device and
the Infotainment system via USB.
Using it makes it possible to display and
manage the content and functions displayed
on the portable device on the Infotainment
system screen.
To avoid distracting the driver while driving,
only specially adapted applications can be
used ››› in Full Link technology description
on page 18.
Requirements
In order to use MirrorLink
®
, the following re-
quirements must be met:
●
The mobile device must be compatible with
MirrorLink
®
.
●
The mobile device must be connected to
the Infotainment system via USB.
●
Depending on the mobile device used, a
suitable application must be installed for the
use of MirrorLink
®
on the device.
Initiating the connection
●
In order to initiate the connection with the
mobile device, it is simply necessary to con-
nect it to the Infotainment system via the
USB connection.
●
A pop-up screen will appear, which will re-
quest that you accept the device.
Function buttons and possible messages
Function button: function
Full Link To return to the Full Link main menu.
Function button: function
CLOSE APPS
Press to close the open apps. Then
press the apps to be closed or the
Close all
function button to close all
the open applications.
1 : 1
Press to change to the mobile device
screen.
SETUP To open the Full Link setup
››› Fig. 21
1
Press to return to the MirrorLink
®
main menu.
›››
Fig. 21
2
Press to display all the function but-
tons in the lower or upper right-hand
margin of the screen.
››› Fig. 21
/
Allows buttons
1
and
2
to be hid-
den or shown.
››› Fig. 1
12
MirrorLink
®
setup
Function button: function
Activate MirrorLink
pop-up windows: Allows MirrorLink
®
pop-up windows in applications that support it.
23
To Next Page
Loading...
