CAR menu
A new lap timer recording is started by
pressing on the surface of the digital lap
timer
+
.
Stop lap timer/Partial time.
The analogue lap timer stops for 5 sec-
onds. After 5 seconds, the analogue lap
timer goes back to showing the real time.
Statistics/delete last lap timer recording.
Offroad*
Fig. 64 CAR Menu Offroad.
●
Press the
CAR
button on the Infotainment
system.
●
Press the
VIEW
function button and then
select
OFFROAD
.
2
3
4
5
If the corresponding equipment is available,
the information that appears is the following:
Compass.
Altimeter: altitude above sea level.
Turning angle of steered wheels.
Coolant temperature.
Lubricating oil temperature
Only the altimeter and 2 more of these items
of information can be displayed at the same
time, but the user chooses which to display,
and in what order, by moving their finger ver-
tically over the dials.
Consumers
Fig. 65 Convenience consumers.
1.
2.
3.
4.
5.
By pressing the
Consumers
button, informa-
tion on the status of the vehicle's main con-
sumption devices is obtained. It is shown via
a consumption indicator bar in l/h (gal/h)
1)
.
Driving data
Fig. 66 Driving data.
The onboard computer is equipped with 3
memories that work automatically. In these
memories you can see the distance travelled,
average speed, time passed, average con-
sumption and autonomy of the vehicle.
1. Since start
Indicates and stores the values of the journey
completed and the consumption from when
»
1)
In the case of Gas (CNG) vehicles, the units are in
kg/h.
75
To Next Page
Loading...
