2. Descriptions
F2 is a standalone fingerprint reader with exquisite & unique appearance and wiegand 26/34
output functions. The machine uses the most advanced fingerprint identification technology and
very safe, which supports to open door by following three ways: fingerprint/card/fingerprint+card.
It’s not only widely used in the commercial and industrial field, such as offices, factories,
warehouse, banks, laboratories, but in the small shops and households.
The operations of this product are all done by the software installed in your PC.
3. Features
Standalone Fingerprint reader
Supports USB & RS485/232 communication
3,000 fingerprint users and 3,000 card users
Supports to back up users’ data (fingerprint & card user info)
Supports to upload & download users’ data
Can be used as a standalone access control
Wiegand26/34 output for connecting to a controller
One relay output for control door
Built-in buzzer
Built-in light dependent resistor (LDR) for anti-tamper
Supports to open door by fingerprint/card/fingerprint+card
Fast Verification: Less than 1s base on full enrollment of 3,000 fingerprint
Two-year warranty
To Next Page
Loading...
