EasyManua.ls Logo

Sebury K3-3 User Manual

Sebury K3-3
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTRUCTION
MANUAL
K3-3
Standalone Access Control
2. Installation and Wiring Instructions
1.1 Introduction
K3-3 is a standalone, convertible integrated reader and access control.
It controls electronic lock, exit button, and the magnetic contact switch
on the door. If the unit is connected to a standard access control unit,
then it functions as a reader. The unit accepts up to 500 users, allows
entry via a 4-6 digits PIN and/or by presenting a proximity EM card.
1. Introduction, Features and Specifications
1.2 Features
Backlit keypad, multi-function, operating as access control or card
reader, suitable for various occasions.
1.3 Specifications
> Operating voltage range: DC12-24V
> Static input current: 20mA
> Max proximity card read range: 5-8cm
> Excitation Frequency: 125KHz
> Card transmit format: Wiegand 26
> Keypad transmit format: 4-6 digits key press to output card number
format. Each press outputs a 4 bits or 8 bits data.
> Size (Height×Width×Depth): 90×60×27mm
> Operating temperature range: -4060° C
> Operating humidity: 0-95% (non-condensing)
40mm
11mm
50mm
Installation
Question and Answer IconNeed help?

Do you have a question about the Sebury K3-3 and is the answer not in the manual?

Sebury K3-3 Specifications

General IconGeneral
ModelK3-3
Card ReaderYes
Card TypeEM, Mifare
Power Supply12V DC
Access MethodCard, Password
CommunicationRS485, TCP/IP
Operating VoltageDC 12V
Operating Temperature-20°C to 60°C
Humidity10% to 90% RH

Summary

Introduction, Features and Specifications

Introduction

Provides an overview of the K3-3 as a standalone access control unit.

Features

Highlights key features like backlit keypad and multi-functionality.

Specifications

Lists technical details such as voltage, current, read range, and dimensions.

Installation and Wiring Instructions

Wiring Definition

Details the function and color coding for each wire connection.

Master keypad Operation

Explains how to enter and use master operation mode for configuration.

User Settings

To unlock the door for card users

Procedure for unlocking the door using a valid card.

To unlock the door for card and PIN users

Procedure for unlocking using a valid card followed by a PIN.

To unlock the door for card or PIN users

Procedure for unlocking using either a card or a PIN.

To change the PIN of a PIN user

Instructions on how to change the existing PIN for a user.

Alarm

Anti Tamper Alarm

Describes the buzzer alarm activation when the unit is tampered with.

Magnetic Contact Switch on the Door

Explains the alarm triggered by forced door opening.

Remove the alarm

Details how to deactivate the alarm by valid card or master code.

Reset to Factory Default

Sound and Light Indication

Reader Application (wiring diagram)

Related product manuals