GB
SEC Electronics PKN10 V0.3 page 11
16. screen_saver_delay:
0 – Screensaver function is not active, current floor is shown all
the time.
1..3600: Time of lift inactivity before screensaver is activated.
Inactivity means that information shown by display is not changed.
17. slide_show_delay: Image change interval.
0 - Slide show is not active.
1..90: Image change interval; for proper operation parameter
screen_saver must be set to “2” and screen_saver_delay to 1
second or more.
18. background_transparency_color: selects which color is considered
transparent (is replaced with background image) for logo and arrows.
0 - Off.
1 – Black is transparent.
2 – White is transparent.
19. emergency_light: Selects display behaviour on battery power.
0 – normal operation (shows background image and
communication error).
1 – emergency light mode (shows only white blank screen and
date/time to maximise car illumination).
20. floor01 .. floor48: Floor designation (name) table from station 1 to
48. Name can be one or two characters long, allowed characters are
0..9, A..Z, Č, Š, Ž, Ć, Đ, +, -. Parameter can’t be set in local
configuration.
Colours can be selected from a predefined 0 to 7 palette or in 16-bit RGB
format as hex constants. Bits 15-11 are for blue, bits 10 to 5 for green
and bits 4 to 0 for red. Examples: 0x0000 = black, 0xFFFF = white,
0xF800 = blue, 0x07E0 = green, 0x001F = red.
A predefined eight-colour palette, is available in local configuration, is: 0
= black, 1 = blue, 2 = green, 3 = light blue, 4 = red, 5 = violet, 6 =
yellow, 7 = white
To Previous Page
Loading...