EasyManua.ls Logo

Seca 334 - Error Codes; Technical Specifications and Accessories; Technical Data; Accessories

Seca 334
3 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Er:011: appears in the display?
The scale is overloaded or the load is une-
venly distributed. Take the load off the scale
or distribute weight more evenly and restart
scale.
Er:012: appears in the display?
The scale was switched on with too great a
load on it. Remove load and restart.
Technical data
Dimensions
Depth: 300 mm
Width: 640 mm
Height: 105 mm
Weight approx. 3.1 kg
Temperature range +10 °C to +40 °C
Maximum load 20 kg / 44 lbs
Graduations
Up to 10 kg / 22 lbs: 5 g / 0.5 ozs
Up to 20 kg / 44 lbs: 10 g / 0.5 ozs
Accuracy better than ±0.3% / ±10 g
Auto Hold function yes
Power supply battery/
mains unit (option)
Power consumption approx. 30 mA
Accessories
Plug-in mains unit
Use only seca original plug-in mains units
with 9 V or controlled 12 V output voltage.
Commercially-available mains units may
supply a higher voltage than stated and
thus lead to damage to the scale.
Disposal
Disposing of the device
Do not dispose of the device in do-
mestic waste. The device must be
disposed of properly as electronic
waste. Follow the national regulations
which apply in your case. For further infor-
mation, contact our service department at:
Batteries
Do not dispose of used batteries in house-
hold waste. Dispose of batteries via local
collection points. When buying new sup-
plies, buy batteries low in harmful substanc-
es which contain no mercury (Hg),
cadmium (Cd) or lead (Pb).
Warranty
A two-year warranty from date of delivery
applies to defects attributable to poor ma-
terials or workmanship. All moveable parts
- batteries, cables, mains units, rechargea-
ble batteries etc. - are excluded. Defects
which come under warranty will be made
good for the customer at no charge on pro-
duction of the receipt. No further claims can
be entertained. The costs of transport in
both directions will be borne by the custom-
er should the equipment be located any-
where other than the customer’s premises.
In the event of transport damage, claims
under warranty can be honoured only if the
complete original packaging was used for
any transport and the scale secured and at-
tached in that packaging just as it was
when originally packed. All the packaging
should therefore be retained.
A claim under warranty will not be honoured
if the equipment is opened by persons not
expressly authorised by seca to do so.
We would ask our customers abroad to
contact their local sales agent in the event
of a warranty matter.

Other manuals for Seca 334

Related product manuals