Seca 334 User Manual

6
Congratulations!
In the seca 334 electronic baby scale you
have acquired a highly accurate, yet sturdy
piece of equipment.
seca has been putting its experience at the
service of health for over 150 years, and as
market leader in many countries of the world,
is always setting new standards with its inno-
vative weighing and measuring develop-
ments.
The seca 334 electronic baby scale is de-
signed for use in the professional field. It is in-
tended both to establish birth weight and to
check weight gain in the growth process.
Safety
• Follow the operating instructions.
• Never leave a baby lying on the scale un-
supervised.
• Do not drop the scale or subject it to
violent shocks.
• Have repairs carried out only by author-
ised parties.
Setting up the scale
The scale is fully assembled on delivery.
Remove the packaging and place the scale
on a firm, level surface.
Power supply
The scale is powered by batteries or a
mains unit (option).
The LC display has a low power consump-
tion - 10,000 weighing operations can be
performed with one set of batteries. Once
battery power is no longer sufficient, bAtt
appears in the display.
Battery and mains unit (option)
If or bAtt appear in the display,
you should change the batteries. You need
six 1.5 V type AA round-cell batteries.
– Carefully turn over the scale.
– Press the tabs on the battery compart-
ment and take off the cover.
– Remove the used batteries and place
the new batteries in the compartment.
Check that polarity is correct.
– Close the cover.
Operation
Weighing correctly
– Press the Start key with no load on the
scale.
se(A, 88888. and 0.000 appear consecu-
tively in the display. The scale is then auto-
matically set to zero and ready for
operation.
– Place the baby on the scale.
– Read the weight off the digital display.
Weight is displayed in 5 g increments up to
10 kg and in 10 g increments up to 20 kg.
Pressing the START key again switches off
the scale.
Connection for
mains unit
Battery compart-
ment
English

Seca 334 Specifications

General

Power Supply	Batteries
Display	LCD
Graduation	50 g
Weight	2.8 kg
Functions	TARE, automatic switch-off

Summary

Congratulations and Introduction

Power Supply and Operation

Battery and Mains Unit

Details on powering the scale using batteries or an optional mains unit.

Weighing Correctly

Step-by-step guide on how to perform a correct weighing operation.

Scale Functions and Maintenance

Auto Hold and Power Saving

Explanation of automatic hold function and power-saving mode.

Weight Display Switching

How to switch the weight unit display between kilograms and pounds.

Taring Weight Display

Instructions on using the tare function to exclude additional weight.

Differential Display Function

Guide to using the differential display for tracking weight changes.

Cleaning the Scale

Recommendations for cleaning the weighing tray and scale housing.

Troubleshooting

Common Error Indicators

Explanation of common display indicators like '0.000' not appearing or battery warnings.

Error Codes

Troubleshooting specific error codes like Er:011 and Er:012.

Technical Specifications and Accessories

Technical Data

Detailed specifications including dimensions, weight, load, and graduations.

Accessories

Information regarding the use of plug-in mains units.

Disposal and Warranty

Disposing of the Device and Batteries

Guidelines for proper disposal of the electronic scale and used batteries.

Warranty Information

Details on the warranty coverage, exclusions, and claims process.