Seca 834 - Setting Up the Scale; Operation; Correct Weighing

Model 834/835 15
GB
– Open the battery compartment lid and
insert the batteries supplied according
to the polarity shown on the battery
compartment.
Check that polarity is correct!
– Now close the battery compartment
cover again carefully.
4. Setting up the scale
– Place the scale on a level and stable
surface. Then position the tray as
shown on the base of the scale and pull
forward until the tray is heard to snap
into place, and the release button is in
the top position.
The tray is now securely interlocked
with the base.
– To remove the tray just press the re-
lease button hard and slide back the
tray.
5. Operation
Correct weighing
– Press the Start key with no load on the
scale.
SE(A, 88888 and 0.000 appear con-
secutively in the display. The scale is
then automatically set to zero and ready
for use.