16
– When weighing infants: Place the in-
fant on the tray, ensuring that the child
lies as still as possible.
– When weighing children able to
stand up: Remove the tray as de-
scribed. Check the secure positioning
of the base. Place the child on the scale
and make sure he/she keeps still.
– Read the weighing result off the digital
display.
The scale must not be subjected to
weights exceeding the maximum load
specified!
– To switch off the scale, press the Start
key again.
Automatic switch-off/economy mode
The scale remains ready for weighing for approx. 20 seconds after being switched on.
Once weighing has been performed, the value is displayed for approx. 2 minutes until the
scale switches off automatically.
Taring weight display (TARE)
The tare function is useful if an additional weight (such as cloths or a pad on the weighing
surface) are to be ignored in the weighing result. Proceed as follows:
– Place the additional weight on the scale
and activate the Tare function by de-
pressing and holding the HOLD/TARE
key.
The display of the scale is now reset to
“
0” and a normal weighing operation
can begin.
– You can now perform as many weigh-
ing operations as you like with this addi-
tional weight.
To Next Page
Loading...
