Seca 869 - Setting up and Aligning the Scale

Modell 869 19
G
B
Setting up and aligning the scale
The screwed feet can be used to level off
any slight unevenness in the floor.
– Place the scale on a level surface.
– Align the scale by screwing the foot
screws. The air bubble in the spirit level
must be right in the centre of the circle.
– Ensure that only the feet of the scale are
in contact with the floor. The scale may
not be in contact at any other point.
Important!
The alignment of the base of the scale
must be checked and corrected if ne-
cessary every time the location of the
scale is changed.
spirit level