8
– Ask the patient to step off the scale.
The weighing result has been erased.
The scale is ready for the next patient.
– If a load greater than 250 kg, 550 lbs or
39 sts is placed on the scale,
St0P ap-
pears in the display.
– To switch off the scale, press the start
key again.
Switching the weight display
The weight display can be switched between kilogrammes (kg) and pounds (lb) or
between pounds (lb) and stones (st).
– Switch on the scale using the start key.
Weight is initially displayed in the last
setting selected.
– To switch the weight display between
kilogrammes and pounds, press the
kg lb st key.
–The kg or lbs display lights up.
– To switch weight display between
pounds and stones, hold down the
kg lb st key for approx. 2 seconds.
The lbs or sts display lights up.
Automatic switch-off/economy mode
The scale automatically detects whether it is being operated on rechargeable/non-
chargeable batteries or whether it is connected to the mains.
– Operation on rechargeable/non-chargeable batteries: automatic shut-down after
3 minutes.
– With mains operation: shut-down only via keypad.
Taring weight display (TARE)
The tare function is very useful, for example for determining the weight of a child or an
object placed on the scale in addition to yourself.
Proceed as follows:
– Press the start key with no load on the
scale.
– First stand on the scales yourself with-
out the additional weight and activate
the Tare function by depressing and
holding the hold tare key.
To Next Page
Loading...
