Need help?Do you have a question about the Seco SX-600 and is the answer not in the manual?
Instructions for powering on the DVR and initial system check.
Overview of the initial setup screen and navigation.
Configures the username and password for the administrator account.
Sets date, time, time zone, language, and video format.
Configures IP address, subnet mask, and DNS server settings.
Configures Dynamic Domain Name Service and port settings.
Sets recording parameters like resolution, frame rate, and quality.
Manages hard drive information, formatting, and overwrite settings.
Displays live camera feeds, time, date, and recording status.
Interface elements at the bottom of the live view screen for navigation.
Procedure for accessing the DVR with username, password, and Device ID.
Configures essential DVR functions: system, date/time, display, record, users.
Configures advanced DVR features: alarms, network, COMM, and PTZ.
Finds and backs up video files; includes video search and playback.
Audits DVR usage, user actions, and alarm events.
Manages installed drives, checks HDD status, and formats drives.
Displays device, network, online, and record information.
Accesses firmware upgrade, standby, reboot, and reset functions.
Accessing the DVR remotely through a cloud service.
Adding or editing registered devices in the cloud account.
Accessing DVR via cloud using Internet Explorer.
Using PC ViewClient software for remote access and management.
Using Mac ViewClient software for remote access and management.
Steps to download and install the Mac ViewClient application.
Overview of the Mac ViewClient application interface and features.
Viewing recorded video and using playback controls in Mac ViewClient.
Configuring settings for the Mac ViewClient application.
Managing snapshot save paths and stream quality in Mac ViewClient.
Interface for remote viewing, playback, and configuration via IE.
Controls for playback, search, and display within Internet Explorer.
Selecting dates on the calendar to search for recorded video events.
Selecting channels and time range for video playback.
Visualizing recording events on a 24hr timeline for playback.
Managing playback, zoom, audio, and display settings.
Remotely configuring DVR settings and checking system logs via IE.
Steps to find the MAC address of a network device using Windows.
Guide to enable unsigned ActiveX controls for remote viewing in IE.
Instructions for installing the 'IE Tab' extension for Chrome.
Instructions for installing the 'IE Tab 2' extension for Firefox.
Steps to find private IP, Subnet mask, and Gateway address.
Guide to configure router for port forwarding for remote access.
Guidelines for setting up RS-485 network for PTZ camera control.
Guidance on setting up alarm inputs with 12V power and relay contacts.
To Next Page
General