Set the main coding and combined coding parameters for
each channel: coding mode, resolution, frame rate, code
stream control, picture quality type, code stream value, one
frame interval parameter, video/audio enable
Set basic network parameters, and set DHCP, DNS
parameters, network high-speed download, network
transmission strategy
PPPOE, NTP, Email, IP permissions, DDNS parameters,
PMS, FTP, alarm center, cloud service, RTSP, wireless
dialing, WIFI, etc.
Set the channel name of the front end, preview prompt icon
status, transparency, area coverage, time title, and overlay of
channel titles.
Set channel, PTZ protocol, address, baud rate, data bit, stop
bit, check
Set protocol, address, baud rate, data bit, stop bit, check.
PS:full digital channel displays RS485 device
Set serial port function, baud rate, data bit, stop bit, check
Set the mode and interval of the round robin
Set round robin mode and interval time of Spot output end
Set the channel mode, view the channel status, and set the
parameters of the digital channel.
Set the specified hard disk as read/write disk, set as
read-only disk, set to redundant disk, clear data, restore
data, etc.
Modify users, modify groups, change passwords, add users,
add groups, delete users, delete groups
The network user who has logged in can be forcibly
disconnected. After disconnection, the account will be frozen
and can be restored after the next boot.
Adjust the top margin, bottom margin, left margin, right
margin, black border vertical and black border horizontal.
Set the time to automatically restart the system and
automatically delete files.
Restore settings status: normal settings, encoding settings,
recording settings, alarm settings, network settings, network
services, output mode, serial port settings, user
management
Upgrade with an external device such as USB
Set some hardware information of device
To Next Page
Loading...
