Secumore G03 - Set Time Interval Upload to Server; Disable fuel or electricity; Resume the Oil and Power System; Set All Alarm Command

8
6.6 Set Time Interval Upload to Server
Send SMS command “ITV+password+space+upload time interval” to the
tracker device.
For example: send SMS “ITV123456 10” it will report data to server at 10s time
interval.
6.7 Disable fuel or elecreicity
Send SMS command “DY+password+space+1” to the tracker, it will reply
“DY CONFIG OK”, and stop your car fuel pump or electricity as well.
6.8 Resume the Oil and Power System
Send SMS command “TY+password+space+1” to the unit, It will reply “TY
CONFIG OK” and resume your car fuel pump or electricity as well.
6.9 Set All Alarm Command
Note: All Alarms only will be sent to Center Number
Function
SMS Command
Remark
Set overspeed alarm
speed123456(space)080
SPEED,OK
Cancel overspeed alarm
speed123456(space)0
Set ignition on alarm
ACC123456(space)1
Cancel ignition on alarm
ACC123456(space)0
Default mode
Close all alarm
KC123456(space)0
Set SMS alarm
KC123456(space)1
Default mode
Set calling alarm
KC123456(space)2