Page 12
Change your Pipit’s default settings
From the Settings screen (shown above) you can do the following:
set your daily consumption target level
configure the target alarm to light, sound, backlight flash, or off
configure message alarm to light, sound, backlight flash, or off
turn the DST one-hour offset on or off
set the display backlight to turn off after 1 minute or stay on
constantly
adjust the touch-screen display contrast
turn the indicator lights on or off
Use the Advance button in the top right-hand corner to access:
Electricity consumption tariff
Electricity generation tariff
Electricity generation
capacity
Erase data
CO
2
factor
HAN network information
Refer the Product user manual available on our website
www.freedomtosave.com.au for further details on settings.
To Next Page
Loading...
Need help?
General