DEFAULT CONFIGURATION IN TRACKSO IOT GATEWAY
Inverter ID: 1
Baud Rate: 9600
Data Bits: 8
Stop Bit: 1
Parity: N/A (None)
CONFIGURATION AT THE METER END
SETTING BAUD RATE, DEVICE ID
- As per the local Secure representative the Device Id (Modbus Id) as well as baud rates remains fixed and cannot be
modified.
- No documentation is available in public domain or on manufacture website which confirm if Id and baud rate can be
changed.
- If found otherwise kindly inform us on support@trackso.in
CONNECTING MULTIPLE METER
As Modbus ID’s are not allowed to be changed multiple meters can not be connected on a single logger.
To Previous Page
Loading...
