20
ACCESSING YOUR WIFI CAMERA
Via LAN (Local Area Network)
Four ways:
1. Click on the shortcut on your computer to run the IP Camera Tool, then click
on the camera listed that you wish to view.
-or-
2. Enter the local IP address of the camera into the address bar of your
preferred browser.
-or-
3. Add the camera to the Multiple Device Settings in ActiveX Mode (Internet
Explorer).
-or-
4. Add the Local IP address to, and run the CMS software.
Via Internet – WAN (Wide Area Network)
Four ways:
1. Enter the WAN IP address plus the port number (i.e. 173.15.11.23:8000)
into the address bar of your preferred web browser.
-or-
2. Add the WAN IP and port number to the Multiple Device Settings using
Internet Explorer.
-or-
3. Register and use your camera with a DDNS service.
-or-
4. Add the WAN IP address to, and run the CMS software.
Getting a Static IP address from your ISP is the preferred way to go. If you
are only able to get a Dynamic IP address (one that changes periodically), you
may consider using a DDNS provider.
DDNS (Dynamic Domain Name Service) is an internet service which allows
you to associate the IP address of your IP Camera with a name like
www.myipcamera.com. Some companies such as
www.dyndns.org provide
this service free of charge. To use the service you must create an account
with a DNS service. You may register at:
www.dyndns.org.
To Next Page
Loading...
