EasyManua.ls Logo

Sedecal HF Series - User Manual

Default Icon
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SEDECAL
Technical Publication
OM-0279R1
Operation
HF Series Generators
RAD Console
Question and Answer IconNeed help?

Do you have a question about the Sedecal HF Series and is the answer not in the manual?

Summary

Important X-ray Protection Warning

Environmental Statement on Equipment Life Cycle

Revision History

Advisory Symbols

Safety Symbols

Section 2 Safety

General Safety Guidelines

Essential safety instructions for the operation and handling of the X-ray equipment.

Operator and Manufacturer Responsibilities

Defines the responsibilities of personnel using and maintaining the X-ray equipment.

Maximum Permissible Dose (MPD)

Guidelines on the maximum radiation dose allowed for personnel and patients.

Radiation Protection Measures

Details on protective measures against X-ray radiation exposure.

Personnel Radiation Monitoring

Methods for monitoring radiation exposure levels for personnel.

Protection Against Electric Shock Hazards

Information on electrical safety standards and precautions.

Electromagnetic Compatibility (EMC)

Guidance on electromagnetic interference and compliance.

Section 1 Introduction

General Features of the HF Generator

Overview of the main characteristics of the high frequency Generator.

Optional Generator Configurations

Details on additional features and configurations available for the Generator.

Product Identification Labels

Information on identification labels attached to the Generator for manufacturer and product details.

Certifications and Compliance

Information regarding the X-ray Unit's authorization and CE MARKING.

Equipment Classification Details

Classification of the X-ray Generator based on safety standards.

Section 3 Operating Controls

Radiography and General Controls

Description of controls for radiography and general operations.

Automatic Exposure Control (AEC)

Explanation of the Automatic Exposure Control system.

Anatomical Programmer (APR)

Details on the Anatomical Programmer for selecting patient anatomy.

Exposure Controls and Indicators

Information on controls and indicators for managing exposures.

X-ray Handswitch Operation

How to use the X-ray Handswitch for exposures.

Heat Units Calculation and Display

Explanation of the Heat Unit calculator and display.

Exposure Counters

How to read and interpret the exposure counters.

Self-Diagnosis Indicators

Information on self-diagnosis indicators and their meanings.

Error Codes and Troubleshooting

List of error codes and actions to resolve system failures.

Section 4 Operating Sequences

Start-up Routine Procedure

Steps involved in the Generator's start-up and self-test.

X-Ray Tube Warm-up Procedure

Recommended procedure for warming up the X-ray tube.

Radiographic Operation Modes

Description of the different modes for performing radiographic operations.

AEC Operation Procedure

Detailed steps for operating the equipment using AEC.

APR Operation Procedure

Steps for performing examinations using the Anatomical Programmer.

Section 5 Periodic Maintenance

Operator Maintenance Tasks

Tasks performed by the operator for periodic maintenance.

Service Personnel Maintenance Tasks

Tasks to be performed by qualified service personnel.

Section 6 Technical Specifications

Generator Technical Factors

Technical specifications for various generator models, including power, mA, kVp, and output.

Range of Radiographic Parameters

Specifies the operational ranges for kV, mA, mAs, and exposure time.

Generator Duty Cycle

Information on the continuous duty cycle of the generator.

Physical Characteristics and Dimensions

Details on the physical dimensions and weight of the equipment.

Sedecal HF Series Specifications

General IconGeneral
BrandSedecal
ModelHF Series
CategoryPortable Generator
LanguageEnglish

Related product manuals