BeagleBone Green Wireless
Introduction
SeeedStudio BeagleBone Green Wireless (BBGW) is a joint effort by BeagleBoard.org and
Seeed Studio. It is based on the open-source hardware design of BeagleBone Black and
developed into this differentiated version. SeeedStudio BeagleBone Green Wireless has included
a high-performance flexible WiFi/Bluetooth interface and two Grove connectors, making it
easier to connect to the large family of Grove sensors. The on-board HDMI and Ethernet are
removed to make room for these wireless features and Grove connectors.
Features
Fully Compatiable with BeagleBone Black
Processor: AM335x 1GHz ARM® Cortex-A8
o 512MB DDR3 RAM
o 4GB 8-bit eMMC on-board flash storage
o 3D graphics accelerator
o NEON floating-point accelerator
o 2x PRU 32-bit microcontrollers
To Next Page
Need help?
General
