Seeed Grove User Manual

7/23/22, 9:41 PM
Grove - Chainable RGB LED - Seeed Wiki
https://wiki.seeedstudio.com/Grove-Chainable_RGB_LED/
1/29
Grove - Chainable RGB LED is based on P9813 chip which is a full-
color LED driver. It provides 3 constant-current drivers as well as
modulated output of 256 shades of gray. It communicates with a
MCU using 2-wire transmission (Data and Clock). This 2-wire
transmission can be used to cascade additional Grove - Chainable
RGB LED modules. The built-in clock regeneration enhances the
transmission distance. This Grove module is suitable for any
colorful LED based projects.

Seeed Grove Specifications

General

Brand	Seeed
Model	Grove
Category	Accessories
Language	English

Summary

Grove LED Versions and Specifications

Key Specifications

Provides essential technical parameters for the Grove - Chainable RGB LED, including operating voltage and current.

Platform Support and Arduino Basics

Arduino: Basic Color Cycling Demo

Outlines the initial steps and code example for cycling through colors using Arduino.

Arduino Library and Color Cycle Example

Chainable LED Library Installation

Arduino Color Cycle Code Example

Presents the Arduino code for demonstrating color cycling through the LEDs.

Arduino: Temperature-Controlled Color Demo

Codecraft Usage Guide for Grove LED

Codecraft Software Configuration

Raspberry Pi Setup for Grove LED

Raspberry Pi & GrovePi Setup

Raspberry Pi GrovePi Python Code

GrovePi Python Code Examples

Offers detailed Python code examples and library functions for controlling the LEDs on Raspberry Pi.

Raspberry Pi Demo Execution Guide

Running the Python Demo

Instructs users on how to run the provided Python demo script to test the Grove - Chainable RGB LED functionality.

Beaglebone Green Setup Guide

Beaglebone Green IDE & GPIO Config

Beaglebone Green Python Code

Beaglebone Green Python Code Structure

Presents the Python code structure and class definitions for controlling the LED on Beaglebone Green.

Grove LED: Libraries and Code Resources