Need help?Do you have a question about the Seeley Breezair EXH Series and is the answer not in the manual?
General| Brand | Seeley |
|---|---|
| Model | Breezair EXH Series |
| Category | Air Conditioner |
| Language | English |
Essential warnings to reduce risk of fire, shock, or injury.
Safety precautions for water pump, fan motor, and circuit breakers.
Overview of the remote thermostat control unit.
Overview of the wall-mounted thermostat control unit.
Set the clock on the remote control before programming other functions.
Use the POWER button to switch the cooler on and off.
Manually adjust fan speed and select between cool and vent modes.
Cooler automatically adjusts fan speed and mode based on room conditions.
Program the timer for automatic operation during specific periods.
Limits cooling/ventilation and reduces power usage.
Manually drains the water tank for cleaning and storage.
Saturates cooling pads before fan starts for optimal cooling.
Automatically monitors and manages water quality in the cooler.
Monitor battery levels and understand low battery indicators.
Configure cooler functions using DIP switches on the remote.
Turn the cooler on/off and select operation mode.
Cooler operates automatically based on sensed temperature.
Manually adjust fan speed and select cool or vent.
Set the cooler to turn on after a specified number of hours.
Set the cooler to turn off after a specified number of hours.
General operation guidance for the cooler.
Adjust cooling level for too cold or not cold enough conditions.
Manually drain the cooler or configure automatic drain settings.
Manually drain the cooler or configure automatic drain settings.
Procedures for pre-season, end-of-season service, and pad removal.
List of items packed inside the cooler for verification.
Identification of major components fitted to the cooler.
Details of available variable speed control kits.
Instructions for removing the cooler from its packaging.
Procedures for removing and replacing cooler pad frames.
Guidelines for selecting an appropriate and safe location.
Instructions for attaching the cooler to roof jacks or supports.
Safe methods for lifting and placing the cooler in its final location.
How to adjust and secure the cooler's leg supports.
Connecting the permanent water supply and float valve.
Installing the inlet solenoid valve assembly.
Installing the drain valve and connecting the drain hose.
Adjusting water level and checking float valve.
Connecting power supply, wiring, and controller cables.
Routing and securing main power and control cables.
Instructions for positioning and mounting the receiver unit.
Guidance for specific mounting scenarios and signal optimization.
Guidelines for optimal placement of the remote control for temperature sensing.
Establishing communication between the remote and the cooler.
Testing cooler operation and diagnosing faults using the remote.
Understanding the LEDs indicating WaterManager operation.
Configure cooler functions using DIP switches on the remote.
Verifying operation, air distribution, and checking for leaks.
Understanding and testing the direct drive motor and its LEDs.
Ensuring all components function correctly during initial operation.
A list of items to verify before and during installation.
Recording the configured DIP switch settings for the remote.
Diagnosing and resolving problems with insufficient cooling.
Identifying causes and solutions for cooler noise.
Troubleshooting pump failures and malfunctions.
Diagnosing and resolving issues with the fan not starting.
Troubleshooting water flow, circulation, and overflow problems.
Addressing issues with water blowing into the building or spray.
Resolving unpleasant odors and pad-related problems.
Diagram showing connections between cooler components and the controller.
Visual representation of wall and remote control system connections.
To Next Page
