English version
V0916
Page 8
D. OPERATION
Presets
This menu contains nine pre-saved operating programs; up to five presets can be assigned to each program by
entering the required setpoints.
The operating programs must be suited to the processes you use. The temperature adjustment system is fine-
tuned for each program.
Available programs:
Customised: the system applies the user-defined settings keyed in at the control panel
Flex: for placing flex and flock
DTG 1: for drying pre-treated materials
DTG 2: for pressing pre-treated materials
SUBLI T: for sublimation printing on textiles
SUBLI R: for sublimation printing on rigid materials
SCREEN: for placing screen transfers
LASER: for placing laser transfers
QUICKFLEX: for placing flex in under 5 seconds
Browse between
programs
Browse between
program presets
To Next Page
Loading...