How to stop dry eyes caused by SEFAM Humidifier?
If you're experiencing dry or irritated eyes while using the SEFAM Humidifier, it's likely due to air leakage around the mask. Try repositioning the mask to ensure a better seal.
How to fix high pressure discomfort from SEFAM DreamStar Duo?
If you're feeling discomfort because the pressure is too high with your SEFAM Humidifier, use the pressure ramp feature when you go to sleep. Relax and breathe slowly through your nose. If the pressure delivered by the device seems to have changed, contact the home care provider to have the device pressure checked, as the pressure levels have been prescribed by your physician and can be changed only by medical prescription.
Why is my SEFAM DreamStar Duo not heating the water?
If the SEFAM Humidifier doesn't seem to be heating water, check that the heat level is set between 1 and 10. Also, confirm that the heated humidifier indicator is displayed on the screen and is not blinking. If the indicator is blinking or not present, contact your home care provider. Note that the heated humidification feature cannot be used when the device is battery-powered.
What to do if my skin is red from using SEFAM DreamStar Duo mask?
If you experience skin redness from your SEFAM Humidifier mask, the headgear may be too tight or the mask size may be too small; try adjusting the headgear. If redness persists, you might be having an allergic reaction to the mask components. In that case, stop using the mask and contact your doctor or home care provider.
Why is the air from my SEFAM DreamStar Duo Humidifier too hot?
If the air from your SEFAM Humidifier is too hot, the air intake filters may be dirty, so clean or replace them as needed. Also, check if the air intake is blocked by bedclothes or clothing and move them away. Finally, the room temperature might be too high, so lower the room temperature and ensure the device is away from heat sources. Remove the patient circuit from under any covers.
Why SEFAM DreamStar Duo Humidifier doesn't turn on?
If your SEFAM Humidifier device isn't lighting up, start by checking that the power supply cord is correctly plugged into the power port, and ensure the cord is properly connected to both the device and the power source. Then, plug another device into the power source to confirm that the outlet is working. If these steps don't solve the issue, contact your home care provider.
How to stop my nose and throat from being dry using SEFAM DreamStar Duo Humidifier?
If you are experiencing a dry or irritated nose or throat while using the SEFAM Humidifier, it might be because the air is too dry. If your device has a water chamber, try using the humidification feature. Also, check the water level in the water chamber and add water if it's low, following the instructions for filling the chamber.
What does HIGH FREQUENCY mean on my SEFAM DreamStar Duo Humidifier?
General| Brand | SEFAM |
|---|---|
| Model | DreamStar Duo |
| Category | Humidifier |
| Language | English |
Important warnings and guidelines to prevent patient injury or device damage during operation.
Specifies the target patient population and application for the DreamStar devices.
Conditions or pathologies for which the use of positive pressure is not recommended.
Details the approved accessories that can be used with the DreamStar devices.
Describes the function and availability of the heated humidifier for Evolve models.
Gradual pressure increase to help the patient fall asleep, adjustable in CPAP and Bilevel modes.
Explains key terms and parameters used in device settings and operation.
Outlines the default, minimum, and maximum values for various device parameters.
Describes how to navigate and access the device's settings and service menus using control buttons.
Provides a reference for understanding the meaning of various icons and symbols shown on the device display.
Details the procedure to enter the device's settings menu using the control buttons.
Explains how to navigate and adjust parameters within the Settings menu for Duo/Duo Evolve devices.
Specific parameter adjustments available for the DreamStar Duo/Duo Evolve in CPAP and Bilevel modes.
Instructions for calibrating the device, particularly for patient circuit selection.
How to change the device's language and set the current time.
Procedure for setting the calendar date on the device.
Locking/unlocking settings for patient control and feature selection.
Setting frequencies for reminders related to filter, mask, service, and memory card usage.
Steps to access the settings menu for DreamStar DuoST/DuoST Evolve devices.
Overview of parameter adjustments within the Settings menu for DuoST models.
Parameter adjustments for DreamStar DuoST/DuoST Evolve in CPAP and Bilevel modes.
Procedure for calibrating the DreamStar DuoST device, including patient circuit selection.
How to set language and time on DreamStar DuoST devices.
Setting date and managing patient-accessible settings for DuoST devices.
Configuring features and patient reminders for DuoST devices.
Accessing and viewing device operating time, total use, and session history.
Adjusting the heat level for the humidifier when a water chamber is connected.
Notification and management of upcoming reminders for filter, mask, service, or memory card events.
Detailed steps for performing specific calibration based on pneumatic configuration.
Instructions for data backup and updating machine settings using a memory card.
How settings are updated via memory card and configuring service cards.
Routine cleaning procedures for the water chamber and its components.
Instructions for cleaning and maintaining the washable filter and its holder.
Monthly maintenance for the device, air intake filters, and water chamber.
Procedures for disinfecting device surfaces and water chamber components.
Lists materials and chemicals that should not be used for cleaning or disinfecting the device.
Explains common on-screen messages and their corrective actions.
Lists error codes, their descriptions, and recommended corrective actions.
Detailed technical data on pressure range, accuracy, ramp duration, and backup frequency.
Specifications related to the integrated humidifier's rate, heating time, and pressure loss.
Environmental conditions for device operation, transportation, and storage.
Details on electrical specifications, dimensions, weight, and water chamber volumes.
Explains device symbols and CE marking indicating compliance with European directives.
Lists relevant standards and guidelines for device disposal.
Data on static and dynamic pressure stability according to ISO 17510-1:2007 standards.
Illustrates the functional components and airflow path within the device.
Details on electromagnetic emissions and immunity requirements for the device.
Guidelines for RF immunity and recommended separation distances for RF communication equipment.
Tables for separation distances and list of compliant cables.
To Next Page
