Need help?Do you have a question about the SEFAM EcoStar Auto and is the answer not in the manual?
General| Ramp Function | Yes |
|---|---|
| Data Storage | SD Card |
| Mask Detection | Yes |
| Leak Compensation | Yes |
| Pressure Range | 4-20 cmH2O |
| Ramp Time | 0 to 45 minutes |
| Humidifier | Optional |
| Power Supply | 100-240V AC, 50/60Hz |
Please familiarize yourself with the safety instructions in the patient manual.
The EcoStar Info and EcoStar Auto devices are Positive Pressure devices indicated for the mask treatment of Obstructive Sleep Apnea and Hypopnea Syndrome (OSAHS).
Use only the authorised accessories listed above or compliant with EN ISO 17510-2:2007 standard.
Increase or decrease the pressure value displayed using the button or .
Switch between CPAP and APAP modes by pressing the button or .
Increase or decrease the value displayed using the button or .
In CPAP mode, set pressure level; in APAP, view max/min pressure.
Select configurations for tubing diameter and humidifier.
Do not use detergent sprays; never use the device without an air intake filter.
List of prohibited cleaning agents and methods.
Detailed list of error codes, causes, and corrective actions.
Details on RF and harmonic emissions and their compliance levels.
Overview of the device's resistance to various electromagnetic disturbances.
To Next Page
