Sega Saturn User Manual

ST-193-091394
Sega Enterprises, Ltd.
(RDJ, 9/27/94)
8
2.3 Power On / OFF
Connecting the AC Cable
Observe the following items when connecting the AC cable.
1) Turn off the Sound Box power switch.
2) Plug the female side (end) of the AC cable into the Sound Box AC inlet.
3) Plug the AC grounded cable plug into an AC outlet.
Sound Box Input Specification are:
• AC85 V ~ 132 V
• 47 Hz ~ 63 Hz
• Maximum power consumption: 50 W
Power ON
1) Turn on the power by turning the Sound Box power switch to ON.
The power switch is a light which flashes whenever the power is
turned on.
2) This turns on the power of the host (such as a Mac) as well as peripheral
devices connected to the sound box.
Note: If the light does not flash, turn off the power, recheck the connections of the AC cable
as well as other cables, then turn the power on again. If it still does not flash contact a
Support Centers.
Power OFF
Following the steps above in the reverse order shuts off the power.

Sega Saturn Specifications

General

Manufacturer	Sega
Type	Home video game console
Generation	Fifth generation
Media	CD-ROM
Resolution	320×224 to 704×480
Controller Ports	2
Best-selling Game	Virtua Fighter 2
Units Sold	9.26 million
CPU	Two Hitachi SH-2 32-bit RISC @ 28.6 MHz
Graphics	VDP1 and VDP2 video display processors
Sound	Yamaha FH1 DSP
Memory	2 MB RAM, 1.5 MB video RAM, 512 KB sound RAM
Dimensions	260 mm × 230 mm × 83 mm