Sega Saturn User Manual

ST-193-091394
Sega Enterprises, Ltd.
(RDJ, 9/27/94)
14
How to Set the SCSI ID
Follow the steps below when changing the SCSI ID. You do not need to
follow these steps if using ID=6 setting.
1. Remove the Sound Box cover.
• Make sure the power of all peripheral devices connected to the Sound
Box is off.
• Remove the Sound Box cover. There are five screws. See Figure 3.4.
BODY COVER
Figure 3.4 Removing the Sound Box Cover
2. Set the SCSI ID.
•Set the ID switch on the sound board according to Figure 3.4 and
Table 3.1.
3. Install the Sound Box cover.
• Cover the casing with the main cover and secure with five screws. See
Figure 3.4. Refer to "Remove the Sound Box cover."

Sega Saturn Specifications

General

Manufacturer	Sega
Type	Home video game console
Generation	Fifth generation
Media	CD-ROM
Resolution	320×224 to 704×480
Controller Ports	2
Best-selling Game	Virtua Fighter 2
Units Sold	9.26 million
CPU	Two Hitachi SH-2 32-bit RISC @ 28.6 MHz
Graphics	VDP1 and VDP2 video display processors
Sound	Yamaha FH1 DSP
Memory	2 MB RAM, 1.5 MB video RAM, 512 KB sound RAM
Dimensions	260 mm × 230 mm × 83 mm