6
In the test mode, ascertain that the assembly has been made correctly and IC Board is satisfactory.
In the test mode, perform the following test: (refer to chapter 9).
9-13 INPUT TEST
This menu is used to test the system inputs such as steering, pedals and buttons. To implement the test, press each
device that is listed and check the results on screen.
9-14 OUTPUT TEST
This menu is used to test the system oututs such as Lamps and LED.
9-8 COIN ASSINMENTS
As this system utilises a Credit Board PCB, it is important that the setting remain 1 COIN 1 PLAY. Deveation from
this setting when using the Credit Board PCB can result in unusual credit outputs.
9-15 TICKET TEST
This menu will allow you to check the output of tickets. (Not required in Amusement Only Mode)
9-16 GAME ASSIGNMENTS
This test is required to confi gure the game according to its location.
6-5 CONFIRMATION OF ASSEMBLY
To Next Page
