EasyManua.ls Logo

Segway Gokart PRO 2 - Remove the S-Max Body from the Gokart

Segway Gokart PRO 2
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3 Remove the S-Max body form the Gokart
1. Rotate counter-clockwise to
unplug the power extension
cord, then close the rubber plug.
3. Remove the adaptor pad of S-Max.
2. Loosen the traps and take out
the S-Max body.
* If lifting the frame by yourself,
do not lift the backside more
than 19° or you may damage the
bumper.
Power off the Gokart before
disassembly.
Do not lift the rear spoiler.
When the App is connected to the S-Max, this icon will glow steadily. When Bluetooth is
enabled—but not connected to a smart phone—this icon will blink.
Bluetooth
Enable and adjust Speed Limit via the App. When the icon is illuminated, Speed Limit is on.
This speed limit can be adjusted in the App. As you approach the speed limit, the S-Max tilts
back.
Speed Limit
Lock
Power Button
Power Level
Enable Lock Mode via the App. The S-Max and App will vibrate and sound an alarm if anyone
moves it. The remote control will also alarm if it is powered on and within range (65 ft. [20
meters]) of the S-Max.
Turn ON/OFF.
The S-Max will automatically power OFF when idle for 10 minutes, or when laid down (horizontal)
for over 30 seconds.
Indicates the remaining battery life. Each block equates to approximately 20% power level.
When the battery is nearly empty this icon blinks and the S-Max beeps, indicating that you
need to charge your S-Max. Your S-Max will gradually reduce the max speed limit as the
power level gradually decreases. Use the App to view the remaining power and estimated
remaining range.
Power Button
Lock
Bluetooth
Speed Limit
Power Level
22 23

Table of Contents

Related product manuals