6 Before the First Ride
There are safety risks when learning to ride the S-Max. You must read the Safety Instructions
and follow the New Rider Tutorial in the App before your first ride.
For your safety, your S-Max is not activated at this time and will beep occasionally after Power
ON.
Until activated, the S-Max maintains a very low riding speed and steering sensitivity. Install the
App on your mobile device (with Bluetooth 4.1 or above), connect to the S-Max with
Bluetooth, and follow the App instructions to activate your S-Max and follow the training
procedures.
Scan the QR code to download the App (iOS 9.0 or above, Android™ 4.3 or above).
Segway-Ninebot App
Power ON the S-Max. The blinking Bluetooth icon indicates the
S-Max is waiting for a connection.
Switch the S-Max to Self-balancing mode on the App*. Follow the
prompts to watch the Riding Safety video, complete the New Rider
Tutorial, and then activate the S-Max.
* When the mode is switched successfully, you will hear two beeps.
Install the App and register/login.
Click Vehicle > Search vehicle to connect to your S-Max. The
S-Max will beep when the connection is successful. The
Bluetooth icon will stop blinking and remain illuminated.
1 2
3 4
5 Charging
Charge port
1. Lift up the
cover
2. Open the
rubber cap
3. Insert the plug into the socket
* Charging the wrong way can cause vehicle
damage.
Your S-Max is fully charged when the LED on the charger changes from red (charging) to green
(trickle charge).
WARNING
ONLY use the original charger, otherwise the battery will be damaged and there is a risk of fire. DO
NOT use wet or damaged batteries. DO NOT charge when the charge port or cable is wet.
Gokart mode
Basic info and settings
26 27
To Next Page
Loading...
