Poor signal, please relocate the charging
station to an open space (see Step 1).
The GNSS antenna is not connected to
the charging station (see ⑤ in Step 2).
Check the signal.
4
Insert the power plug into a suitable power socket.
3
Connect the extension cable and the power interface.
2
If the signal is poor, relocate the GNSS antenna to an open space. Buy the extansion kit individually if you need to install it on a wall or roof.
Flashing red:
When the light on the charging station becomes blue (or green), it means the satellite signal is strong.
or
Flashing yellow:
Malfunction. Please contact after-sales
service.
Align the notch on the extension cable (A)
with the groove on the power supply connector (B).
A B
Turn the nuts until they are locked into each other.
Step 3: Check the satellite signal
Connect the extension cable with the power supply.
1
Note: To avoid performance degradation, always keep the connectors, accessories,
connection part of the charging station and antenna away from any dirt or mud.
Never allow water to get into the connectors or any parts and connection points.
19
To Next Page
Loading...
