Note: Before updating the firmware ensure that
the machine is on the charging station;
the network is connected;
the battery power is more than 20%.
Activate the mower
Enable Bluetooth on your phone, log in to the app and
follow the instructions to pair with the mower.
2
Wait patiently for 3 min until the ambient light turns green (or blue).
3
Connect the charging station to the power supply. Make
sure the mower is in the charging station.
1
If the light flashes yellow for more than
3min, it means the satellite signal is weak.
Please return to Step 1 in chapter 2.2 .
Secure the charging station with the nails supplied and secure the extension cable.
4
Update the mower to the latest rmware
To fully experience Navimow, prior to use, please upgrade to the latest firmware.
How to update:
After activating the device, maintain the network connection state, follow the guidance in the pop up window, and wait for 10-15 mins to
automatically complete the device upgrade. During this process, please do not power off or perform other operations. You can start
using it after the app prompts that the update is successful.
22
To Next Page
Loading...
