EasyManua.ls Logo

Segway Ninebot eKickScooter ZING - Maintenance and Care; Cleaning and Storage Guidelines

Segway Ninebot eKickScooter ZING
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Charging Time Approx. 4 h
Battery Pack
Battery Type Lithium-ion battery
Nominal Voltage 21.6V
Max. Charging Voltage 25.2V
Charging Temperature 32–104°F (0–40°C); 50–95°F (10–35°C) recommended
Nominal Capacity / Energy 2550 mAh / 55.08 Wh
Battery Management System Over-heating, short circuit, over-current and over-charge protection
Battery Charger
Model NB-25D2-00D8-US
Input Voltage 100–240 V~
Output Voltage 25.2 V
Output Current 0.8 A
Output Power 20.16 W (0.02 kW)
Motor
Max. Power 200 W (0.2 kW)
Nominal Power 130 W (0.13 kW) 150 W (0.15 kW)
Others
Braking Method Regenerative brake + hand-operated brake + foot brake
Tires Tubeless tire; material: synthetic rubber
Battery Indicator RG LED light
Mode Indicator White LED light
Frame Material Alluminum-alloy
Shock Absorber Spring damper
Maintenance
Maintenance should be carried out by an adult regularly.
WARNING : Do not dispose of this product in a landfill, by incineration, or by mixing with household trash. Serious danger/injury
can occur because of the electrical components.
Cleaning
Use a soft and wet cloth to clean. Stains hard to remove can be scrubbed with a toothbrush and toothpaste, then wiped off with a
soft and wet cloth.
CAUTION
Do not wash your scooter with alcohol, gasoline, acetone, or other corrosive/volatile solvents. These substances may damage the
appearance and internal structure of your scooter. Do not wash your scooter with a power washer or hose.
WARNING
Before cleaning, make sure the scooter is powered off, the power cord is unplugged, and the rubber cap on the charge port is tightly
sealed; otherwise you may damage the electrical components.
Storage

Related product manuals