To Next PageTo Next Page
Need help?Do you have a question about the Segway Ninebot ES1L and is the answer not in the manual?
General| Motor Power | 250W |
|---|---|
| Tire Size | 8 inches |
| Water Resistance | IPX4 |
| Charging Time | 3.5 hours |
| Top Speed | 12.4 mph (20 km/h) |
| Range | 12.4 miles (20 km) |
| Max Load | 220 lbs (100 kg) |
| Brake System | Electronic and foot brake |
Assemble the stem and unfold the kickstand for stability.
Engage the folding pedal mechanism for proper operation.
Connect handlebar wires and slide onto the stem securely.
Install screws using the included hex wrench for assembly.
Wear protective gear and power on the KickScooter before riding.
Stand on the footboard and push off to start gliding.
Maintain balance and use the throttle to control speed.
Learn safe braking and turning maneuvers for control.
Avoid public roads and refrain from phone/earphone use while riding.
Brake safely and do not carry passengers for safety.
Avoid folding pedal use while riding and refrain from stairs/jumps.
Avoid rain, puddles, and riding with one hand or foot.
Avoid overtaking and maintain safe speeds on uneven surfaces.
Be mindful of head clearance and tire contact with obstacles.
Do not overload handlebar and avoid touching hot hub motor.
Fold the pedal and then the handlebar until it locks.
Release the hook, upright the stem, and flip up the pedal.
