Charging
Open the charge port cover.
Charge the KickScooter for three seconds to activate the battery before the first use.
Otherwise, your KickScooter cannot be powered on.
Insert the power cord and
plug into a wall outlet.
* The charger is built-in.
Close the charge port cover when finished.
1 2 3
5
6
When charging, the speedometer icon indicates the current battery level when the KickScooter is powered on.
When the scooter is not powered on for seven consecutive days and its battery level is under 30%, the battery will enter into sleep mode. If
this happens, your scooter cannot be powered on. Please charge it for three seconds to activate the battery.
≤30%
+
≈
=
7
Activation
1
2
An inactivated KickScooter will keep beeping when turned
on, and its speed is limited to 9.3 mph (15 km/h).
Scan the QR code to download the
Segway-Ninebot App and register/log in.
3 4
5
Click “Search vehicle” and pair
to connect to your KickScooter.
Follow the instructions to watch
the Riding Safety.
Click to activate the
KickScooter.
Segway-Ninebot
01 02 03 04 05 06 07 08 09
10 11 12 13 14 15 16 17 18 19 20 21
22 23 24 25 26 27 28
29
To Next Page
Loading...
