70
Troubleshooting Procedures (cont.)
SE-3 Patroller Will Not Power On
Problem:
Your Segway SE-3 Patroller will not power on when you insert and turn the power key.
Review the following procedures prior to troubleshooting this problem:
• “Removing the Battery Module” (p. 49)
• “Installing the Battery Module” (p. 48)
Recommended Action:
1. Make sure the SE-3 Patroller's Battery Module is charged.
2. If a Warning/Fault message appears on the User Display when attempting to power on, see “Warnings and Faults," (p. 73).
3. If the SE-3 Patroller still will not power on, remove the Battery Module and then re-install it.
To Next Page
Loading...