Segway SE-3 Patroller - Page 73

71
Info SE-3 Setup Operate Riding
Tips
Battery Maintain T-shoot Warn Contact
Index Schedule
Tire/Wheel Assembly is Loose and/or Wobbles
Problem:
The Tire/Wheel assembly is not secure. It appears to be loose and/or wobbles.
Review the following procedure prior to troubleshooting this problem:
• “Checking the Tire/Wheel Assembly” (p. 59)
• "Replacing a Rear Tire/Wheel" (p. 62)
Recommended Action:
1. Make sure the Segway SE-3 Patroller is unplugged and powered off.
2. Tighten the Wheel Nuts. Torque to 55N-m(40ft-lbf).
3. If the Tire/Wheel Assembly is still loose or wobbles, remove, clean, and reseat the Tire/Wheel Assembly to the hub on which the Tire/
Wheel Assembly mounts.