SEI Industries Bambi Bucket BB1214 Service Manual

Section 8: Repairs
Bambi Bucket Service Manual – Models 6072-1821 52
7. Place a plastic cover sheet over the patch followed by
a weight bag for 12 hours at room temperature.
Remove the weight bag and leave to dry for 24 hours.
8. If the patch will be subjected to abrasion after 24
hours, paint over the patch with glue. Painting the
patch also provides protection from ultra violet light
and weather. Allow the bond to harden for 24 hours at
room temperature before using the item.
NOTICE
Allow repair to harden for 24 hours at room temperature before using the item.
Repairs will likely fail if:
• The area to be repaired is not perfectly clean and scrubbed to a matte finish before applying
the patch.
• Repairs are attempted during wet or cold weather.
• The glue and patch are not properly placed, creating air bubbles between the glue and the
patch.
• The patch is not weighed down for 24 hours.
• The bucket is used before the glue has set.
NOTICE
Aquaseal® urethane adhesive is designed for use on fabrics like the Bambi Bucket shell. The shelf life
of this adhesive is about one year. Fresh adhesive can be obtained directly from SEI Industries Ltd.

SEI Industries Bambi Bucket BB1214 Specifications

General

Brand	SEI Industries
Model	Bambi Bucket BB1214
Category	Other
Language	English