SEI MS070400TX - Page 3

Large TV/Media Stand
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Using hardware that is too long will cause damage.
Before beginning assembly, separate each type of hardware. Carefully study the hardware
diagrams below . You may receive extra hardware with your unit.
Assembly Tool Required
No. 2 Phillips Screwdriver
(A)
8mm x 30 mm
Wood Dowel
Quantity
of 27
1/4” x 1” Bolt
(B)
Quantity
of 20
(D)
Quantity
of 8
(E)
Metal Pin
Quantity
of 4
Assembly Tool Required
No. 2 Phillips Screwdriver
(Not Included)
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.
Do not return product to store. Please call
manufacturer for assistance, questions or
parts.
(G)
(H)
Quantity
of 4
Quantity
of 2
Magnet Pin
(J) (L)
Quantity
of 2
3.5mm x 15 mm
Screw For Magnet
3/16” x
3
8
mm
Bolt For Drawer
Quantity
of 18
Quantity
of 8
Quantity
of 8
Quantity
of 4
(C)
(F)
(I)
5/32” x 22mm
Bolt For Wood Knob
3mm x 10 mm
Screw For Magnet Pin
3.5mm x 12 m
m
Screw For Back
Wood Knob
(
K
)
Quantity
of 2
Magnet
Metal Nut