SEI MS070400TX - Final Assembly and Shelving

Large TV/Media Stand
Assembly Instructions
Figure 9
Figure 10
Figure 11
5/32” x 22mm
Bolt For Wood Knob
(
G
)
Quantity
of 2
(
F
)
Wood Knob
Quantity
of 2
5/32” x 22mm
Bolt For Wood Knob
(
G
)
Quantity
of 2
(
F
)
Quantity
of 2
Wood Knob
(
H
)
Quantity
of 8
Metal Pin
Step 1. Put the Drawer Bottom Panel(15)
into inner grooves of Drawer
Side Panels(14) and Drawer
Face Panel(13).
Step 2. Insert Nut(D) into predrilled
holes on Drawer Back Panel(16),
then be attach Drawer Back
Panel(16) to end side of Drawer
Side Panels(14),fasten with
Bolts for Drawer(E) and tighten.
Step 1. Attach Wood Knob(F) into the
Drawer Face Panel(13) with Bolt
For Wood Knob(G) and tighten.
Step 1. Insert the Metal Pins(H) into
desired holes of side panels(2,3,4,5).
Step 2. Put the Adjustable Shelves(17)
above the Metal Pins(H).
Step 3. Attach the Wood Knob(F) into
the Doors(9,10) with Bolt For
Wood Knob (G) and tighten.
Step 4. Put the finish drawer in the
Bottom space.
3/16” x 38 mm
Bolt For Drawer
(E)
Quantity
of 4
Metal Nut
(D)
Quantity
of 4