To Next PageTo Next PageHow to reset a lost password on Seiki LED TV?
To reset a lost password on your Seiki LED TV, go to the SET Password setting in the LOCK menu and enter the master password “8899”. This will clear your previous password, allowing you to enter a new one.
Why is my Seiki SE32HY power suddenly turning off?
Your Seiki LED TV might be turning off suddenly because the power supply is interrupted, the sleep timer is set, or the Auto Standby feature is activated. Check the power, sleep timer, and Auto Standby settings of your TV.
What to do if my Seiki LED TV remote control does not work?
If your Seiki LED TV remote control isn't working, first, check for any obstructions between the remote and the TV, ensuring you're pointing the remote directly at the TV. Then, make sure the batteries are installed with the correct polarity (+ to +, - to -). If that doesn't work, install new batteries.
Why is there no or poor color on my Seiki SE32HY LED TV?
If you're experiencing no or poor color, or poor picture quality on your Seiki LED TV, try adjusting the settings in the PICTURE menu. You can also try another channel to rule out broadcaster issues. Additionally, check if the video cables are connected properly.
What to do if my Seiki SE32HY LED TV does not respond to buttons?
If your Seiki LED TV does not respond when pressing any buttons, the TV may have frozen up. Disconnect the power cord from the power socket for a few minutes, then reconnect it and try operating the TV as usual.
How to fix poor reception on some channels on Seiki SE32HY LED TV?
If you're experiencing poor reception on some channels with your Seiki LED TV, try tuning to another station as the station or cable channel may be experiencing problems. If that doesn't work, reposition the antenna for better reception. Also, check for sources of possible interference.
How to adjust picture ratio on Seiki SE32HY?
If the pictures on your Seiki LED TV appear in the wrong ratio, adjust the Aspect Ratio settings in the SETUP menu or press the ASPECT button on the remote control.
Why does the picture appear slowly after switching on my Seiki SE32HY LED TV?
It is normal for the picture to appear slowly after switching on your Seiki LED TV; the image is muted during the TV startup process. Please contact your service centre if the picture has not appeared after five minutes.
How to resolve signal out of range on Seiki LED TV?
To resolve a signal that is out of range (invalid format) on your Seiki LED TV, adjust the resolution, horizontal frequency, or vertical frequency.
Essential electrical safety precautions for connecting and operating the TV.
Guidelines for safe physical handling, placement, and cleaning of the TV.
Lists all the items included in the TV package.
Identifies and explains the controls and indicators on the TV's front panel.
Details the various input/output ports on the back of the TV.
Instructions for attaching the TV stand to the unit.
Steps to detach the stand for wall mounting the TV.
Explains the functions of each button on the TV remote control.
Guides through the first-time TV setup process, including language and time.
Process for scanning and tuning TV channels automatically.
How to use the TV's on-screen menu system and remote.
Instructions on how to switch between different connected devices.
Adjustments for image quality like brightness, contrast, and color.
Options to customize sound modes, bass, treble, and language.
Configure sleep timer, time zone, and daylight saving time.
Various system settings like menu language, transparency, and zoom.
Options for system lock, parental controls, and rating region settings.
Manage air/cable selection, auto scan, favorites, and channel labels.
How to view JPEG photos from a USB storage device.
How to play MP3 music files from a USB storage device.
Explains the MPAA rating system for movies and content.
Details the TV Parental Guideline rating system for broadcast content.
Solutions for when the TV won't turn on or respond to commands.
Troubleshooting steps for video issues like no picture or poor quality.
Solutions for audio problems such as no sound or unusual noise.
Information about lost passwords and reset procedures.
Addresses issues related to connecting and displaying the TV in PC mode.
Details the warranty replacement policy for defective products.
Information on obtaining replacement parts under warranty.
Clarifies consumer responsibility for shipping charges during warranty service.
General| Screen shape | Flat |
|---|---|
| Response time | 14 ms |
| Display diagonal | 31.5 \ |
| Display brightness | 200 cd/m² |
| Display resolution | 1366 x 768 pixels |
| Display technology | LED |
| Native aspect ratio | 16:9 |
| LED backlighting type | Direct-LED |
| Supported video modes | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p |
| Contrast ratio (dynamic) | 1400:1 |
| Display number of colors | 16.78 million colors |
| Supported graphics resolutions | 640 x 480 (VGA), 800 x 600 (SVGA), 1280 x 768 (WXGA), 1360 x 768 (WXGA) |
| Display refresh rates supported | 60 Hz |
| Motion interpolation technology | - |
| 3D | No |
| Tuner type | Analog & digital |
| RMS rated power | - W |
| PC in (D-Sub) | Yes |
| DVI-D ports quantity | 0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Product color | Black |
| Panel mounting interface | 200 x 100 mm |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 60 W |
| Power consumption (typical) | 0.5 W |
| Package depth | 150 mm |
| Package width | 815 mm |
| Package height | 510 mm |
| Package weight | 6305 g |
Weight and Dimensions| Depth (with stand) | 208 mm |
|---|---|
| Width (with stand) | 730 mm |
| Height (with stand) | 486 mm |
| Weight (with stand) | 4581 g |
| Depth (without stand) | 79 mm |
| Height (without stand) | 441 mm |
| Weight (without stand) | 4490 g |
