To Next PageTo Next PageHow to reset a lost password on a Seiki LED TV?
To reset a lost password on your Seiki LED TV, go to the SET Password setting in the LOCK menu. Then, enter the master password "8899". This will clear your previous password, allowing you to enter a new one.
What to do if the Seiki SE58GY27T remote control does not work?
If the remote control for your Seiki LED TV isn't working, first check for any obstructions between the remote and the TV. Make sure you're pointing the remote directly at the TV. Also, ensure the batteries are installed with the correct polarity (+ to +, - to -). If needed, install new batteries.
Why does my Seiki SE58GY27T LED TV power turn off suddenly?
There are several reasons why your Seiki LED TV might be turning off suddenly. The power supply might be interrupted, so check the power connection to the TV. Also, check if the sleep timer is set or if the Auto Standby feature is activated.
What to do if my Seiki LED TV cannot be switched on?
If your Seiki LED TV won't switch on, verify that it's properly connected to the power supply. Also, ensure that all connected AV devices are switched off before you attempt to switch on the TV.
Why is there no picture and no sound on my Seiki SE58GY27T?
If you're getting no picture and no sound on your Seiki LED TV, first check whether the TV is switched on. If it is, try changing to another channel. The issue might be with the broadcaster.
What to do if my Seiki SE58GY27T LED TV has a picture but no sound?
If your Seiki LED TV has a picture but no sound, first press the VOL +/- buttons to increase the volume. Check if the sound is muted by pressing the MUTE button. If that doesn't work, try another channel, as the problem may be with the broadcaster.
How to fix no or poor color or picture on Seiki SE58GY27T?
If you are experiencing no or poor color or picture quality on your Seiki LED TV, try adjusting the settings in the PICTURE menu. You can also try another channel, as the problem may be caused by the broadcaster. Also, check if the video cables are connected properly.
Why is the reception poor on some channels of my Seiki SE58GY27T?
If you're experiencing poor reception on some channels with your Seiki LED TV, the station or cable channel might be having problems, so try tuning to another station. The station signal may also be weak, so try repositioning the antenna for better reception. Also, check for sources of possible interference.
What to do if there are no pictures when connecting HDMI to Seiki LED TV?
If you're not getting any pictures when connecting via HDMI to your Seiki LED TV, check if the input source is set to HDMI1, HDMI2, or HDMI3.
What to do if the Seiki SE58GY27T LED TV does not respond when pressing any buttons?
If your Seiki LED TV freezes up and doesn't respond when you press any buttons, disconnect the power cord from the power socket for a few minutes. Then, reconnect the power cord and try to operate it again as usual.
General| Screen Size | 58 inches |
|---|---|
| Display Type | LED |
| HDMI Ports | 3 |
| USB Ports | 2 |
| Refresh Rate | 60 Hz |
| Smart TV | Yes |
| Built-in Wi-Fi | Yes |
| Resolution | 1920 x 1080 |
