5
English
SCREW LOCK TYPE CROWN
● Some models have the screw lock type crown, which can be locked by the screw
when it is not necessary to be operated.
● Locking the crown will prevent operating errors.
● Unscrew the crown before any crown operation. When the operation is over,
screw the crown in to lock.
■ HOW TO OPERATE THE SCREW LOCK TYPE CROWN
If your watch has a screw lock type crown, unscrew it before any crown operation.
❖
Always keep the crown locked unless it is necessary for operating the crown.
[To unscrew the crown]
Turn the crown counterclockwise (down-
ward) to unscrew it. The crown is unlocked
and can be operated.
The crown can be pulled out.
[To screw the crown in]
Upon completion of the crown operation,
screw the crown in completely until it stops
by turning it clockwise (upward) while gen-
tly pressing it back into the original position.
Turn the crown while pressing
it back in.
To Next Page
Loading...
